How to fix or repair REAN Plastic Sunglass Frame Hinge
Frame Detail : Rean Sunglass
Service Detail: Service No. P1
Service Description : Plastic frame soldering
Where a plastic frame has snapped and needs to be “welded” back together.
Turn around : 4~5 working days.
Alex wanted to fix his broken pair of Rean sunglasses.
The hinge had snapped off from the end piece of front frame.
We provided him with our ‘mail-in’ service.
For plastic frames,
the hinge connecting to frame is usually the weakest area depending on design.
If the screws are too tight or frames are placed on your head, which flexes the arms.
Most likely will weaken the hinge section.
We remove the hinge from the end pieces of the frame, in order for ‘re-soldering’.
Get a FREE QUOTE for your Frame.
We fill up the gap in the hole as same material of the frame.
Then let them dry at least one day.
We position the hinge back where it connects to the frame with heating.
*Precisely heat the hinge and plastic, a steady temperature is used to prevent the
plastic from melting or pushing the hinge too deep into the frame
If needed, we adjust the position of the hinge while we put it in.
Follow the instruction, how to place an order on our website.
Finally, we polish and clean the frame-hinge area. For a shiny ready-to-wear repaired sunglass.
Contact us NOW, if you have same problem!
WHAT OUR CUSTOMER HAVE TO SAY
ABOUT OUR SERVICE.
Below are some of the recent comments our customers have made about working with us.
We will appreciate your positive feedback to increase our commitment and confidence.